Riley Stoves & Sweeps
A cast-iron wood burning stove with the fire lit, fitted with a stainless twin-wall flue in a timber-lined garden room

HETAS-registered · Ormskirk, West Lancashire

Wood burners fitted and chimneys swept properly

Stove installation, flue lining and clean, no-mess chimney sweeping across Ormskirk, West Lancashire, Southport and Merseyside. Free survey and a written quote before any work starts.

  • HETAS-registered installer
  • Fully insured on every job
  • Certificates issued for your home insurance
  • Based in Ormskirk (L39)

Where would you like to start?

Two things we do, and we do them well

Whether you want a stove fitting from scratch or your flue swept before the cold sets in, pick the one that sounds like you.

Selected work

Real installs, in real homes
around West Lancashire

View all 33 projects
Multi-fuel stove set under a curved brick archway with a patterned encaustic tiled hearth, fire lit
Brick arch & encaustic hearthMulti-fuel stove into an opened-up chimney breast, patterned tile hearth.
Wood burner in a herringbone brick recess beneath an oak beam with warm uplighting
Herringbone recess, oak beamBrickwork and beam built around the appliance, uplit chamber.
Inset stove framed by a reclaimed brick surround with a brick arch lintel
Reclaimed brick surroundArched brick lintel with an inset stove and slate hearth.
Suspended cylindrical designer stove in an open-plan room with steel-framed glazing, fire burning
Suspended designer stoveOpen-plan install beside steel-framed glazing.
Stove in a brick fireplace with a timber lintel and stone hearth on a wood floor
Timber lintel & stone hearthTraditional opening kept, appliance sized to the room.
Contemporary inset stove set into a smooth polished plaster chimney breast
Inset, polished plasterContemporary chamber built and finished flush.
Twin-wall insulated flue system fitted externally up a brick house wall
External twin-wall flueNo chimney needed — insulated system run up the gable.
Cylindrical wood burner in a brick corner recess with the fire lit
Corner brick recessCylindrical burner, exposed brick, black hearth plate.

Stove & wood burner installation

A stove that draws properly,
and paperwork that stands up

Most of what goes wrong with a wood burner is decided before it's lit — wrong size for the room, a flue that won't draw, or an install that was never signed off.

  • Sized on a free survey, not over the phone. We measure the room, check the flue and clearances, and tell you what it actually needs.
  • A written, itemised quote. You can see what the stove costs, what the liner costs and what the labour costs — before you commit to anything.
  • No chimney? Not a problem. Twin-wall insulated flue systems can run internally through the roof or externally up the wall.
  • Signed off and notified to building control. You get a Certificate of Compliance — which matters to your insurer now, and to your buyer's solicitor later.
A cylindrical wood burner fitted against an exposed brick chimney breast with the fire lit

Chimney sweeping

Swept clean, drawing right,
and certificated

The part homeowners actually worry about isn't the sweeping — it's the soot on the carpet. Here's exactly how we stop that happening.

  • Sealed and vacuumed throughout. Dust sheets down, the opening sealed with heavy-duty sheeting, and a HEPA soot vacuum running the whole time we power-sweep.
  • Draw tested before we leave. A clean flue is no use if it isn't pulling properly — so we check it, not just sweep it.
  • A swept certificate for your insurer. Most policies expect an up-to-date one before they'll entertain a chimney-related claim.
  • If we find a problem, we show you. We'll photograph it and quote it separately. You're never asked to say yes to extra work on the doorstep.

Worth knowing: we check your logs with a moisture meter while we're there. Anything over 20% moisture smokes badly and tars up the flue you've just paid to have cleaned.

A stove set into a reclaimed brick surround with an arched brick lintel and slate hearth

Reviews

What our customers say

We're gathering our Google reviews and they'll appear here. We'd rather show you nothing than show you something we made up.

In the meantime, the 33 photographs on this site are all real jobs, in real homes, across West Lancashire and Merseyside — and we're happy to talk you through any of them.

How it works

Four steps, no surprises

Get in touch

Call, WhatsApp a photo of your fireplace, or send the form. Tell us roughly what you're after.

We come and look

A free survey of the room, the flue and the clearances. For a sweep, we agree a date instead.

A written quote

Itemised, in writing, with the options explained. No obligation and no chasing you afterwards.

Fitted and signed off

Work done, house left clean, certificate issued and the install notified to building control.

Who we are

About Riley Stoves & Sweeps

We're a HETAS-registered stove and chimney business based in Ormskirk, working across West Lancashire, Southport and north Merseyside.

A wood burner should look right and be safe, and the two aren't separate jobs. We size it properly, fit it to standard, and don't cut corners on the parts you'll never see.

Every install is certified and notified to building control. Every sweep comes with a certificate. Dust sheets go down on both, and your room comes back to you the way we found it — just warmer.

Where we work

Ormskirk and across West Lancashire

We're based in Ormskirk (L39). If you're near the Lancashire and Merseyside border, ring us — we'll tell you straight away whether we can get to you.

Primary areas

  • Ormskirk L39
  • Southport PR8
  • Burscough L40
  • Rufford L40
  • Tarleton PR4
  • Maghull L31
  • Skelmersdale WN8

Also covering

  • Formby L37
  • Crosby L23
  • Wigan WN1
  • St Helens WA10
  • Preston South PR1
  • Liverpool North L10

Questions

The things people ask us first

How often should my chimney be swept?

For wood-burning and multi-fuel stoves, once a year is strongly advised — ideally just before the cold season. If you burn coal or damp, high-resin wood, twice a year is better. Most home insurance policies expect an up-to-date sweep certificate before they'll cover a chimney-related claim.

Do I need a chimney to have a wood burner fitted?

No. If your home hasn't got a traditional masonry chimney, we can design and install a twin-wall insulated flue system. The stainless steel pipe can route up through the ceiling and roof, or out through an external wall and up above the guttering.

Are you HETAS registered?

Yes. It means stove fittings, liners and twin-wall systems can be signed off and notified to building control without a separate local authority inspection — and you get a Certificate of Compliance for your records. That matters to your insurer now, and to your buyer's solicitor when you come to sell.

Will you make a mess of my house?

No, and this is the part we're most careful about. Dust sheets go down, the fireplace opening is sealed with heavy-duty sheeting, and a HEPA soot vacuum runs continuously while we power-sweep the flue. Everything is cleared away at the end.

What happens if you find extra work while you're here?

We show you, photograph it, and quote it separately. You're never asked to agree to extra work on the spot, and you're free to get other prices.

How long does a stove installation take?

A standard install — lining an existing brick chimney, laying a hearth and connecting the stove — is usually one working day. Heavier work, like opening up a fireplace, fitting a lintel or building a chamber, typically takes two days.

Do you check for wet wood?

Yes. UK rules limit burning logs above 20% moisture, and wet wood smokes heavily and coats your flue with tar and creosote. During a sweep we'll check your logs with a moisture meter and give you straight advice on seasoning wood properly.

How do I get a price?

For a stove installation we come out, survey the room and the flue, and send you a written, itemised quote. The survey is free and there's no obligation. For a chimney sweep, call or WhatsApp us and we'll confirm a date. Costs depend on the flue, the liner length and how much building work the opening needs — which is exactly why we look first rather than guess.

Get a quote

Tell us about your fireplace

Book a free survey for a new stove, get your annual sweep in the diary, or just ask us something. Whichever's easiest for you.

Your details come to us and are only used to arrange your work. No marketing, ever.